Publicidad
SpeedEasy Quick Setup
Procedures :
1. Correctly insert the Intel® Pentium III/Pentium II/Celeron™ processor.
2. Plug in other configurations and restore the system.
3.
Switch on power to the system and press the <Del> key to enter BIOS Setup.
4. Enter " CPU SpeedEasy Setup" menu to set up the CPU speed.
Note: If you do not set the CPU speed, your system will run at the
default setting ( 200MHz for processor with 100MHz host bus
speed, 133MHz for processor with 66MHz host bus speed, for bus
ratio locked processor, run its real speed.
5. Save and exit BIOS Setup, your system will now boot successfully.
Manual for WinneX 2
WinneX 2
S.1
Publicidad
