Parent Unit - IKEA UNDVIKA Manual Del Usuario

6. Y ou can carry the parent unit with you by attaching the
Rubber ring (14). To remove the rubber ring, bend it
outwards and pull it off the unit.
Charging
Baby unit:
When battery is low the battery symbol will flash red. Connect a
power supply to the input connector (2).

Parent unit:

When battery is low the battery symbol will flash red. Place
parent unit in baby unit docking connector (7) or connect a
power supply to the USB-C connector (11).
For charging, use only NIMH type AAA/HR03 rechargeable
batteries.
Do not attempt to charge other types such as Alkaline, Carbon
Zink etc. The baby monitor has built in protection and will detect
wrong battery types. The battery symbol (4) will indicate error
by flashing.
Recommended battery types:
3 x IKEA LADDA 900 (AAA/HR03, 1.2V, 900mAh, Ni-MH)
(Not included)
Do not mix batteries of different capacities, types or date
stamps.
9