Assembly; Assembling The Flags - Sachtler ACE Manual Del Usuario

EN EN

Assembly

Assembling the flags

The Ace Matte Box comes with two side flags and one top flag. The side flags are secured by
clamps, located either side of the sunshade. The top flag is secured by a clamp on top of the
sunshade, between the two utility bars.
To assemble the side flags onto the Ace Matte Box (see Fig. 2):
If required, turn the side flag clamp knob counter-clockwise to loosen the side flag
clamp.
Insert the side flag cut-out between the sunshade and the side flag clamp [A], then
tighten the side clamp knob [B] until it grips the side flag.
Adjust the angle of the side flag as desired [C], then tighten the side clamp knob [B].
Fig. 2 Assembling the side flags
-6-