Assembling The Rod Bridge - Sachtler ACE Manual Del Usuario

Assembling the rod bridge

The Ace Matte Box comes with a rod bridge attached. The rod bridge can be installed in two
positions, depending on the lens diameter used.
To assemble the rod bridge when using small diameter camera lenses (see Fig. 5):
Align the rod bridge with the recess on the sunshade. Using the 3 mm Allen key
supplied, tighten the two screws to secure the rod bridge in position.
Fig. 5 Assembling the rod bridge - small diameter camera lenses
To assemble the rod bridge when using large diameter camera lenses (see Fig. 6):
Align the rectangular recess of the rod bridge with the mounting holes on the sunshade.
Using the 3 mm Allen key supplied, tighten the two screws to secure the rod bridge in
position.
Fig. 6 Assembling the rod bridge - large diameter camera lenses
-9-
EN EN