Assembling The Filter Frames - Sachtler ACE Manual Del Usuario

EN EN

Assembling the filter frames

The Ace Matte Box comes with four filter frames. The filter frames are housed in two filter stages,
located between the sunshade and the rear clamping interface. The front filter stage is fixed, the
rear filter stage can be rotated through 90 degrees left or right.
To assemble the lens filter frames (see Fig. 4):
Push up the filter spring and align the filter in the frame, then release the spring to fix the
filter in place [A or B].
Slide the assembled filter frame into the filter stage. Slowly push the filter frame down,
whilst pressing the filter frame release button, until it is in position [C or D].
If required, rotate the rear filter frame 90 degrees. Push the handle of the filter frame to
the left or right until it is in position [E].
!
Fig. 4 Assembling the filter frames
-8-