Technical Specifications; Packing List - Selecta Autester ST Dry PV III Manual De Instrucciones

MANUAL DE INSTRUCCIONES CÓDIGO 80311 REV E

3 Technical Specifications

Autoclave volume:
Mains Volt:
Electrical power: (W)
Max. Current: (A)
Fuse: (Fast. Type H, dimensions)
Mains wire
Weight (Kg Net):
Vessel Dimension usable (cm Ø x high)
External Dimensions: (cm DepthxWidthxHeight) 117x48x62
Vessel capacity: (L)
Used volume:
Max load: (Kg) (Metal)
Weight per support (Kg/cm
Weight per support (Kg/cm
Total space + doors open
Tap Water in max. pressure allowable (bar)
Tap water in min. pressure allowable (bar)
Water vol. per cycle (L)
Water quality suggested
Thermal heat to ambient: (W/h)
Water reservoir volume: (Litres)
Water in connector
Air entry filter porosity
Noise level: (1m)
Operating time:
Ambient:
Over voltage level:
Contamination degree:
Steam contact material
Vessel material:
Frame material:
Steam generator:

4 Packing List

Autoclave delivered together with:
-
-
J
.P. SELECTA s.a.u.
) Empty
2
) Load + Water
2
Instruction manual
Internal rack of bottom of the tank
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
Ene 2020 (Sujetas a modificaciones sin previo aviso)
50L 80L
230V 50/Hz
3000 4850
13 21
20A 25A
PHASE Neutral, Ground (sec.2,5mm
108 136
Ø30x70 Ø40x60
107x58x72
50L 80L
48L 78L
45
25
35
Add 1m at height
2
0,5
0,75 1,50
Conductivity demineralized > 100 microS/cm
750 850
10
3/4''
0.20 micres
Lower than 70 dBA
Continuous left 20 minutes between cycles.
Indoor use
High up to 2000m
Ambient operating range from 5ºC to 40ºC.
Maximum relative humidity 80% for temperatures up to 31ºC, linearly
decreasing to 50% relative humidity at 40ºC
Category II
2
Stainless Steel, Copper, Teflon, Brass
Stainless Steel
Coated steel
Stainless Steel
150L
400V III/50Hz
7500
20
32A
) R,S,T neutral, earth (sec 6mm
2
250
Ø50x70
118x80x90
150L
140L
50
5.0
850
15
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Pag.: 25
)
2