Axxess AXBUCS-NI326V Instrucciones De Instalación

Installation Instructions for AXBUCS-NI326V
Nissan (with 4.3" display radio) 2010-up
• Pre-wired AXSWC harness (AXSWC sold separately)
• Retains the factory backup camera to an aftermarket radio
• Includes the AXCSD-6V 12-volt to 6-volt converter
• AXBUCS-NI326V harness • AXCSD-6V 12-volt to 6-volt converter
NISSAN
Altima coupe 2010-2013*
Altima sedan 2010-2012*
Altima sedan
Cube
Frontier
* For use when retaining the OE backup camera only.
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Axxess Integrate
REV. 1/20/20
AXBUCS-NI326V
INTERFACE FEATURES
INTERFACE COMPONENTS
APPLICATIONS
Juke
Murano
2013-up Quest (without Bose)
2010*
2013-up* Rogue
TOOLS REQUIRED
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
2015-up*
2015-up
2011-up*
2011-2013*
axxessinterfaces.com • metraonline.com
Rogue
Rogue Select 2014-2015*
Sentra
Titan 2013-2015*
Versa Note
2014-up
2010-up*
2014-up*