Troubleshooting Tips - Abus AirSecure CO2WM110 Instrucciones De Uso

Alarma de dióxido de carbono
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
Settings
Set max. and min. value for CO
alarm
2
1.
flashes during setting
2. Decrease the value by pressing the
increase the value by pressing the
3. To exit and save the selected settings, press the
button
4. When the "Back" symbol
"Settings" button
page
Set value for temperature and humidity alarm
1.
flashes during setting
2. Decrease the number by pressing the
increase the number by pressing the
3. To exit and save the selected settings, press the
button
4. When the "Back" symbol
"Settings" button
page
Set "Do not disturb" time
1.
flashes during setting
2. Decrease the number by pressing the
increase the number by pressing the
3. To exit and save the selected settings, press the
button
4. When the "Back" symbol
"Settings" button
page
button and
button
flashes, briefly press the
to return to the main settings
button and
button
flashes, briefly press the
to return to the main settings
button and
button
flashes, briefly press the
to return to the main settings
– 28 –
View alarm history
1. Move to the previous entry by pressing the
and to the next entry by pressing the
2. Press the
settings menu
Set temperature unit
1. Select °C (degrees Celsius) or °F (degrees Fahrenheit)
by pressing the button
2. To exit and save the selected settings, press the
button

Troubleshooting tips

1. The device will not switch on
→ Check that the power supply unit is powered and that the meter is firmly
plugged in.
2. Low battery power
→ Charge the battery for more than 24 hours.
3. Slow response
→ Check that the airflow channels on the back of the meter are not blocked.
4. The detector displays "Sensor error"
→ Contact your dealer.
Settings, Troubleshooting
button
button to exit and return to the main
or
and go back to the main settings page
– 29 –
button
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido