Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. Click Setup, Network and then
click Wireless.
13. Click Site Survey. Select your
wireless network. If encryption
is enabled, select the proper
Authentication type, enter the
Pre-Shared Key and then click
Apply. (Example shows
WPA2-PSK. If your wireless
network does not support WPA,
select open or shared instead.
Contact your network
administrator for more
14. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in.
Note: The TV-IP121W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
15
English
Publicidad
Tabla de contenido
