Transport, Storage And Disposal - Madas RG/2MCSH Manual Del Usuario

8.0 - MAINTENANCE
• No maintenance operations need to be carried out inside the device. If operations must be carried out inside the
device (changing the spring, replacing the filter, etc.), it is advisable to contact the Technical Department. In any
case, before carrying out any dismantling operation on the device, make sure that there is no pressurised gas inside.

9.0 - TRANSPORT, STORAGE AND DISPOSAL

• During transport the material must be handled with care, avoiding any impact or vibrations to the device;
• If the product has any surface treatments (e.g. painting, cataphoresis, etc.) they must not be damaged during transport;
• The transport and storage temperatures must be as indicated on the rating plate;
• If the device is not installed immediately after delivery it must be correctly stored in a dry and clean place;
• In humid facilities, it is required to use desiccant agents or heating to prevent condensation;
• At the end of its service life, the product must be disposed of in compliance with the legislation in force in the country where
this operation is performed.
10.0 - WARRANTY
The warranty conditions agreed with the manufacturer at the time of the supply apply.
Damage caused by:
• Misuse of the device;
• Failure to comply with the requirements set out in this document;
• Failure to comply with the regulations pertaining to installation;
• Tampering, modification and use of non-original spare parts;
shall not be covered by warranty rights and no compensation for damage shall be claimed.
The warranty also excludes maintenance work, the assembly of devices by other manufacturers, making changes to the device
and natural wear.
Madas Technical Manual - 5|5.3b - REV. 0 of 2
19
Sep 2019
th
RG/2MCSH - RG/2MBHZ