Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
fig a: Cover without bottom cover
Guides for
filter element
6.0 - TRANSPORT, STORAGE AND DISPOSAL
• During transport the material needs to be handled with
care, avoiding any impact or vibrations to the device;
• If the product has any surface treatments (e.g. painting,
cataphoresis, etc) it must not be damaged during transport;
• The transport and storage temperatures must observe the
values provided on the rating plate;
• If the device is not installed immediately after delivery
it must be correctly placed in storage in a dry and clean
place;
• In humid facilities, it is necessary to use driers or heating
to avoid condensation.
• At the end of its service life, the product is to be disposed
of in compliance with legislation in force in the country
where this operation is performed.
8.0 - RATING PLATE DATA
The rating plate data
(see example provided here)
includes the following:
• Manufacturer's name/logo and address (possible distributor name/logo)
• Mod.:
= device name/model followed
by the connection diameter
• CE-51AQ647 = certification pin number
• Cl. A
= Tolerance on P2 ( A= ± 15% )
• Gr. 2
= Mechanical resistance group 2 in accordance with EN 13611
• EN 88-1
= Product reference regulation
• P1
= Inlet pressure range at which product operation is guaranteed
• P2
= Outlet pressure range
• (-15...+60) °C = Temperature range within which product operation is guaranteed
•
= In compliance with ATEX Dir. followed by the protection mode
•
= Conformity with Regulation (EU) 2016/426 followed by Notified Body No.
• year
= Year of manufacture
• Lot
= Product serial number (see explanation below)
• U1812
= Lot issued in year 2018 in the 12th week
• 7634
= progressive job order number for the indicated year
• 00001
= progressive number referring to the quantity of the lot
RG/2MT...X - FRG/2MT...X
7.0 - WARRANTY
The warranty conditions agreed with the manufacturer at the
time of the supply apply.
For damage caused by:
• Improper use of the device;
• Failure to observe the requirements described in this
document;
• Failure to observe the regulations pertaining to installation;
• tampering, modification and use of non-original spare parts;
are not covered by the rights of the warranty or compensation for
damage.
The warranty also excludes maintenance work, the assembly
of parts of other manufacturers, making changes to the device
and natural wear.
Mod.: FRG/2MTEX DN 20
CE-51AQ647
P2: 16-60 mbar - CI.A - Gr.2 - EN 88-1
year: 2018
Lot:U1812
7634/00001
14
The filter element must
be placed inside these
guides
Via Moratello, 5/7 - 37045
Legnago (VR) - Italy
www.madas.it
P1:400-500 mbar
Madas Technical Manual - REV. 0 of 10
(-15...+60) °C
II2G
II2D
0051
May 2018
th
Publicidad
Tabla de contenido
