Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
25-3420
25-3425
26-3420
ITEM
QTY
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
FRONT BRACKET
4,5
2
REAR BRACKET
6
8
3/8-16 BRIDGE WELD NUT
7
8
3/8-16 X 1.25" HEX HEAD BOLT
8
8
3/8" FLAT WASHER
9
8
3/8" LOCK WASHER
10
8
3/8-16 HEX NUT
11
8
3/8-16 X 1.00" BUTTON HEAD BOLT
12
8
3/8" INTERNAL TOOTH LOCK WASHER
13
8
PLASTIC WASHER
1,2
2
ESTRIBOS, ACOMPAÑANTE
3
2
SOPORTES DELANTERAS
4,5
2
SOPORTES
6
8
SUELDE NUEZ 3/8-16
7
8
PERNOS CON CABEZA HEXAGONAL DE 3/8-16 X 1,25"
8
8
ARANDELAS PLANAS DE 3/8"
9
8
ARANDELAS DE PRESIÓN DE 3/8"
10
8
TUERCAS HEXAGONALES DE 3/8-16
11
8
PERNO TERMINAL DE 3/8 - 16 X 1
12
8
ARANDELA DE PRESIÓN DE DENTADO INTERIOR DE 3/8"
13
8
ARANDELA DE PLÁSTICO
1,2
2
MARCHE-PIEDS, PASSAGER
3
2
SUPPORTS AVANT
4,5
2
SUPPORTS ARRIERE
6
8
SOUDER LA NAUX 3/8-16
7
8
BOULON A TETE HEXAGONALE DE
8
8
RONDELLE PLATE DE 3/8 PO
9
8
RONDELLE A FREIM DE 3/8 PO
10
8
ÉCROUS HEXAGONAUX 3/8-16
11
8
BOULON A TETE RONDE 3/8-16 X 1,00 PO
12
8
RONDELLE A FREIN A DENTS INTERIEURES 3/8 PO
13
8
RONDELLE DE PLASTIQUE
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely before
STEP 1.
beginning.
Remove rubber plugs from vehicle body.
STEP 2.
Thread 3/8-16 x 1.25" hex head bolts through bridge weld nuts, insert into holes, and use plastic washers to hold in place.
STEP 3.
SEE FIGURES 1 AND 2.
Attach driver side brackets to the previously assembled 3/8" bolt plate using four 3/8" flat washers, 3/8" lock washers, and
STEP 4.
3/8-16 hex nuts as shown.
Attach driver side step bar to cradles with the
STEP 5.
vehicle. Secure with 3/8" button head bolts and internal tooth lock washers as shown.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque values are
STEP 6.
26 Ft. Lbs. for 3/8" fasteners, and 19 Ft. Lbs. for 3/8" button head fasteners.
Repeat installation for passenger side.
STEP 7.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2007-08 HYUNDAI SANTA FE
APLICACIÓN:
APPLICATION: HYUNDAI SANTA FE 2007-08
DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
CONTENTS -
CONTENIDO
, PASSENGER (4) AND DRIVER (5)
(1)
Y CONDUCTOR
TRASERAS
, ACOMPAÑANTE
(1)
ET
, PASSAGER
(5)
SEE FIGURES 1 AND 2.
HYUNDAI SANTA FE
, MOD. 2007-08
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
COTE PASSAGER
1
2
- CONTENU
(2)
(4)
Y CONDUCTOR
CONDUCTEUR (2)
ET
CONDUCTEUR (6)
3/8-16 X 1,25
PO
logo facing outward. Step pad closer to end of tube goes to rear of
Westin
4
3
TOOLS -
9/16" SOCKET
7/32" HEX BIT SOCKET
RATCHET
TORQUE WRENCH
LLAVE DE TUERCAS DE 9/16"
LLAVE DE ALLEN 7/32"
(5)
MANERAL
LLAVE DE TORQUE
DOUILLE 9/16 PO
CLEF DE ALLEN 7/32 po
CLIQUET
CLEF DE COUPLE
SEE FIGURE 3
WO:
75-0845 REVISION 8/24/07
5
HERRAMIENTA
- OUTILS
.
Publicidad
Manuales relacionados para Westin 25-3420
Resumen de contenidos para Westin 25-3420
- Página 1 , MOD. 2007-08 APPLICATION: HYUNDAI SANTA FE 2007-08 AUTOMOTIVE PRODUCTS, INC. STEP BAR ASSEMBLIES PASSENGER SIDE LADO DEL ACOMPAÑANTE ENSAMBLES DE ESTRIBOS COTE PASSAGER MONTAGES DE MARCHE-PIEDS 25-3420 25-3425 26-3420 DRIVER SIDE LADO DEL CONDUCTOR COTE CONDUCTEUR ITEM CONTENTS - CONTENIDO...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 FIGURE 3 STEP BAR ATTACHMENT FIGURA 3 ACCESORIO DE ESTRIBO FIGURE 3 FIXATION DU MARCHE-PIEDS Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706...