Westin 25-2730 Manual De Instrucciones

AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
ENSEMBLES DE MARCHE-PIEDS
25-2730 25-2735
25-2750 25-2755
25-3470 25-3475
ITEM QTY
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3 3 MOUNT FRONT PASSENGER/REAR DRIVER
4 3 MOUNT FRONT DRIVER/ REAR PASSENGER
5 12 3/8-16 X 1.00" BUTTON HEAD BOLT
6 12 3/8" INTERNAL TOOTH LOCK WASHER
7 12 M8 FLAT WASHER
8 12 M8-1.25 HEX REVERSIBLE LOCK NUT
1,2 2 ESTRIBOS
3 3 BASE DE MONTAJE, LADO DEL ACOMPAÑANTE DELANTERO/
CONDUCTOR TRASERO
4 3 BASE DE MONTAJE, LADO DEL CONDUCTOR DELANTERO/
ACOMPAÑANTE TRASERO
5 12 TORNILLOS TERMINALES DE 3/8-16 x 1"
6 12 ARANDELAS DE PRESIÓN DE DENTADO INTERIOR DE 3/8"
7 12 ARANDELAS PLANAS DE 8MM
8 12 TUERCA REVERSIBLE A PRESIÓN M8 - 1,25
1,2 2 MARCHE-PIEDS CÔTÉ
3 3 FIXATION AVANT CÔTÉ PASSAGER / ARRIÈRE CÔTÉ CONDUCTEUR
4 3 FIXATION AVANT CÔTÉ CONDUCTEUR / ARRIÈRE CÔTÉ PASSAGER
5 12 VIS A TETE RONDE DE 3/8 -16 x 1,00 PO
6 12 RONDELLE A FREIN A DENTS INTERIEURES DE 3/8 PO
7 12 RONDELLE PLATE 8MM
8 12 ECROU FREINE REVERSIBLE M8-1,25
STEP 1.
Remove contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
STEP 2.
Determine bracket locations for passenger front/driver rear and driver front/passenger rear brackets.
FIGURES 1 AND 2.
STEP 3.
Locate passenger side mounting locations on vehicle. Attach mount brackets to rocker panel. Leave loose.
SEE FIGURE 2.
STEP 4.
Attach passenger side step bar to cradles with the
3/8"fasteners. Leave loose.
the vehicle.
STEP 5.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque
values are 22 FT.LBS. for 8mm fasteners and 19 FT.LBS. for 3/8" fasteners.
STEP 6.
Repeat installation for opposite side.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2005-08 NISSAN FRONTIER KING CAB/CREW CAB
APLICACIÓN:
APPLICATION:
2
26-2750
26-3470 DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
CONTENTS - CONTENIDO
, LADO DEL ACOMPAÑANTE
, PASSAGER
SEE FIGURES 2 AND 3.
2005-08 NISSAN XTERRA
NISSAN FRONTIER, CABINAS KING CAB/CREW CAB, MOD. 2005-07
NISSAN XTERRA , MOD. 2005-08
NISSAN FRONTIER 2005-08 AVEC CABINE RALLONGÉE / CABINE DOUBLE
NISSAN XTERRA 2005-08
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
1
COTE PASSAGER
- CONTENU
(1) Y EL CONDUCTOR
(1) ET CONDUCTEUR (2)
Westin
logo facing outward as shown. Assemble with
The step pad closest to the bend goes to the rear of
3
TOOLS - HERRAMIENTAS
13MM SOCKET
13MM WRENCH
7/32" HEX WRENCH
RATCHET
TORQUE WRENCH
(2)
DADO DE 13MM
LLAVE DE TUERCAS DE
LLAVE HEXAGONALE DE 7/32"
MANERAL
LLAVE DE TORQUE
DOUILLE 13MM
CLEF 13MM
CLE HEXAGONALE 7/32 PO
CLIQUET
Cl DE COUPLE É
75-0549 REVISION A 9/5/07
WO:
4
- OUTILS
13MM
SEE