Medir El Nivel De Sonido (Modalidad Slm ) - Twilight ST-130 Guía De Uso

Medir nivel de sonido (modo SLM)
Entrar en modo SLM
‣
Presione el botón de ENCENDIDO para encender el medidor.
‣ Presione el botón SET para entrar en el modo de configuración. Hay 7
ajustes de función.
‣
Presione el botón ARRIBA o ABAJO para seleccionar el modo "SLM" en la
pantalla LCD, luego presione ENTER.
Measure data
Press RIGHT button to select test functions: SPL > Leq > SEL > PeakMAX. Note:
‣
To switch between different modes, please press STOP button first.
Press START/PAUSE button to noise doses measurement. To pause, press
‣
START/PAUSE button again.
Icon "OVER" or "UND"displayed when sound level exceeds the bounds.
‣
Leq integral time and same sampling time can be set in setup mode. Refer to
‣
"Settings" section.
When the sampling time is set to zero, the integration time will not be stopped
‣
until the user exits the measure.
Press STOP button to stop testing.
‣
CAUTION: Wind blowing across the microphone results in additional extraneous
noise. Please mount the windscreen to prevent the undesirable signals in high
wind condition (> 10 m/s). Keep the microphone dry and avoid severe vibration.
Se muestra el icono SLM
8