PolyVision a3 CeramicSteel Serif Guia De Instalacion página 3

Washer
Serif panel
Washer
Cap
1.
Use the predrilled holes in the Serif panel
as a template to mark the holes to be
drilled into the drywall.
2.
Drill the anchor into the drywall until flush.
Drive the screw through the barrel into the
anchor. Screw threaded stud into the barrel.
3.
Place a protective washer on the threaded stud
and put the Serif panel into place. Place a second
washer onto the threaded stud and thread on cap
until snug.
Anchor*
*Not required for wood or
metal studs
Barrel
Screw
Threaded stud
Table 1
Product # of Screws Weight (kg/lb)
Serif 2420 6 37 kg/81.5 lb
Serif 1830 6 28 kg/61.73 lb
Serif 1185 4 18 kg/39.68 lb
Page 3 of 7
Doc # 146743 Rev A