Yamaha BD-S477 Manual De Instrucciones página 32

SETUP menu
Playback
Disc Auto Playback
You can set Disc Auto Playback to on/off. When set to on,
a disc will play back automatically after loading.
*
On , Off
Angle Mark
You can set to display the Angle Mark (
Blu-ray Disc/DVD with multiple angles is played back.
*
On , Off
PIP Mark
You can set to display the PIP Mark (
Disc with picture in picture (p. 23) is played back.
On * , Off
Secondary Audio Mark
You can set to display the Secondary Audio Mark (
when Blu-ray Disc with secondary audio is played back.
*
On , Off
Last Memory
You can set whether this Player remembers the last
playback position of a disc (Blu-ray or DVD video) when
it is set to standby mode or the disc tray is opened.
*
On , Off
Note
– Some discs are not compatible with this function.
Security
Change Password
You can set the password for changing the Parental
Control Level and Country Code. Refer to "Parental
Control" (p. 28) and "Country Code" (p. 28).
Notes
– The default password is 0000.
– If you forget the password, refer to
"Troubleshooting" (p. 35) and set all the Security
settings to their default settings.
Parental Control
In some Blu-ray Discs/DVDs, a control level for disc
viewing is set depending on the age of the viewer. You
can set the Parental Control shown on the screen
depending on the disc content.
The password (see "Change Password" on p. 28) needs to
be entered before the Parental Control Levels is set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, 1–8
28
En
Country Code
You can set the Country Code you live in. The password
(see "Change Password" on p. 28) needs to be entered
before the Country Code is set. This setting may be used
for rating of Parental Control and disc playback.
Network
Connection Setting
) when
You can select a network connection method.
Wired*
Wireless
) when Blu-ray
)
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Connection Test
You can perform an internet connection test. If the test is
failed, please check "IP Setting" (p. 28) and perform the
test again.
IP Setting
You can configure the network settings.
Auto*
Manual
Hints
– Numeric keys Enters characters.
– 2/3
– CLEAR
– ENTER
Connects the network using Ethernet.
Connects the network using a wireless LAN.
You can select settings for a wireless LAN
connection. Follow the on-screen instructions to
proceed.
Scan
Searches for an access point. You can connect the
access point that is found.
Manual
You can manually set information for an access
point.
Auto
If your access point supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the access point
without entering information manually. Select PBC
(Push Button Configuration) or PIN code method.
Select to automatically configure the network
settings of this Player with the DHCP server.
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Moves the highlight.
Deletes a character.
Saves the settings and exits from
the menu.