DJI TAKYON Z415-M Guia De Inicio Rapido página 8

System Status Beep Codes
The system status is indicated by a series of beeps emitted from the motor.
Normal
Startup Tone
Abnormal
Rapid Beeping
Slow Beeping
Alternating Double
and Triple Beeps
Three Beeps
* Refer to the User Manual for more details on these settings.
Specifications
Parameters
Max Allowable Voltage
Max Allowable Current** (Continuous)
Max Peak Current (< 3 sec)
Max OneShot125 Signal Frequency
Max Regular Signal Frequency
Defaulted Output PWM Frequency
Weight (With Cables)
Battery
Operating Temperature
** Data measured in a ventilated environment and at a temperature of 25°C.
6
Description
System ready.
Description
Starting input signal is not at minimum.
Check the settings of your flight controller, receiver
and remote controller.
No signal input.
Using the remote controller for configuration*
Enter motor rotation direction quick settings*
Z415-M
17.4
650
500
Z425-M
17.4
15 25
20 30
650
500
16 16
6.3 7.5
2S - 4S LiPo
-10° to 40° C (14° to 104° F)
Unit
V
A
A
Hz
Hz
kHz
g