OSCILLATION
Use the
SWING button to activate the oscillation of the appliance. The display lights
up on the control panel.
To deactivate the function, press the SWING button again.
This function allows the blown-out air to be distributed to the left and right. This enables
TIMER
Use the TIMER button to switch off the appliance in a time-controlled way.
With each press on the timer button, the operating time is gradually extended by half
an hour each time, from 30 minutes to 8 hours.
Pay attention to the four indicators on the appliance:
o 1x press 30 minutes 0.5H lights up
o 2x press 1 hour 1H lights up
o 3x press 1.5 hours 0.5H + 1H lights up
o Etc.
MODES
Use the MODE button to select between the following modes:
The respective display lights up on the control panel.
Normal Mode
Nature Mode
Sleep Mode
COOL AIR
Use the COOL button to start the function.
Make sure that the water level indicator is above the MIN level.
As soon as the button is pressed, the appliance starts moistening the water filter to
create cold and moist air, that is then blown out of the appliance.
NOTE
horizontal air distribution in the room.
The fan is running in normal operation.
Simulates a breeze to create pleasant, natural airflow.
Simulates a gentle breeze to generate an airflow adapted
to sleep requirements.
Seite 22 von 134