Riello 3010419 Instrucciones De Instalación, Montaje Y Funcionamiento página 18

Procedure for installing the kit on the following burners:
882T - 885T - 974T
Disconnect the burner from the power supply!
DANGER
➤ Loosen the fixing screw and remove the cover.
➤ Assemble the kit as shown in Fig. 5, removing the metal
bracket.
➤ Fix the kit to the existing track, disconnecting it from the
bracket supplied; if necessary, use the track and the screws
supplied.
➤ Remove the control box and carry out the internal wiring fol-
lowing the diagram (Fig. 6) for any external wiring require-
ment, use the fair leads supplied.
➤ When the installation is finished, put back the electrical
panel, put back the control box, secure the cover and switch
on the burner.
974T
S9226
2916271
Clean contacts kit
885T 882T
4 GB
20093864
CLEAN CONTACTS KIT
Fig. 5
Fig. 6