Nogueira DPM-1 Manual De Instrucciones página 15

Fasten the motor on the stand rails, then install
the pulley and the belts.
3- Assemble the cyclone on the machine (if the model is not equipped with the cyclone, ignore the
following instruction):
Stretch the belts using the existing stretcher on
the stand. Use the nuts on the stretcher for
adjustment (G).
Place the shield cover (F), the cover (E) and the
ventilator (D). Install the ventilator box again
(H).
Place the rubber ring (J) in the outlet from the
ventilator box and insert the curved tube in the
cyclone (K).
DPM-500/1/2/4
15