Troubleshooting - Reliable Enviromate E3 Manual De Instrucciones

TROUBLESHOOTING

disassemble or attempt to repair the unit on your own. Return the unit to Reliable
PROBLEM
No steam is released through
the steam fittings.
attachments.
Not enough steam pressure.
POSSIBLE CAUSES
1. Steam unit is not turned on.
4. Generator is not fully
heated.
2. Condensation was created
from non-use.
1. Scale may have built up.
be set too low.
REMEDY
2nd position.
2. Put required amount of
3. Plug unit into outlet.
tem until steam comes out.
sired pressure is reached.
-
-
10