Troubleshooting - Reliable BRIO 225CC Manual De Instrucciones

TROUBLESHOOTING

If your Brio 225CC steam cleaner does not work well, check the following points:
PROBLEM
The operating pilot
lamps fails to light up.
No steam is emitted
when the steam button is
operated.
Only a very small amount
of steam flows.
The appliance takes a
very long time to heat
up.
16
CAUSE
The appliance is neither
plugged into a socket nor
switched on.
The socket is faulty.
The power cable is
damaged.
The childproofing lock is
preventing release of the
steam button.
The water tank is empty.
The steam controller is
on minimum.
The water tank has
calcium buildup.
SOLUTION
Insert the plug into a
socket or switch the
appliance on.
Check the socket by
unplugging the steam
cleaner and plugging in a
different appliance.
Contact Reliable.
Push the black pin on the
right hand side of the
steam gun to the left.
Turn the steam control-
ler counter-clockwise
until sufficient steam is
emitted.
Descale the water tank.