Finishing Sander Handling; Maintenance And Cleaning Instructions; Cleaning And Storage; Environmental Policy - VITO VILV250 Manual De Instrucciones

Finishing sander handling

1. Place the entire surface area of the sanding disc on
the material;
2. Switch on the finishing sander, and move it with some
pressure on the workpiece, making circular/transverse
and linear movements;
3. Use a thicker sanding sheets for greater material
removal and a thinner sanding disc for finishing stages.
To decide on the best type of sanding sheets to use,
perform tests before use on the final product.
The dust created while the equipment is in
use can be hazardous to health:
▪ Always wear goggles and dust mask when sanding;
▪ All individuals working with the sander or coming
into the work area should wear a dust mask;
▪ It is forbidden to eat, drink and smoke while using the
sander;
▪ This sander is used for sanding wood, iron, plastic and
similar materials;
▪ It is prohibited to use this sander on plaster and
surfaces that have leaded paint;

MAINTENANCE AND CLEANING INSTRUCTIONS

Before inspecting, performing any maintenance or
cleaning work, turn off the sander and the power cord.
The finishing sander does not require any additional
lubrication or maintenance. However, regular cleaning
should be carried out to ensure continuous, trouble-
free operation.

Cleaning and storage

Cleaning
After each use, clean all components of the finishing
sander. Clean the sander with a clean, moist cloth or
blow with low pressure compressed air.
handling protects the power tool and extends its service
life.
The tool and its ventilation slots must be kept clean.
Clean the ventilation slots regularly or whenever they
become blocked.
Storage
When not in use, store the finishing sander in a dry,
clean place, free of corrosive smoke and out of the
reach of children.

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools in your household
waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can obtain information regarding the disposal of
the power tool through the person in charge for the
recycling in your city.

CUSTOMER SERVICE

Tel.:
E-mail: international@centrallobao.pt
Site: www.centrallobao.pt
Careful
+351 256 248 826
25