Error Messages - GERATHERM active control+ Manual Del Usuario

Error messages

Problem Display symbol
Nothing appears on
No power
the display
Low battery
Indicator
power
Nothing appears on
No power
the display
No display when
No display
buttons pressed
E 01
E 02
E 03
Error
E 04
messages
EExx
Cause
Battery charge too low
Battery charge low
Adapter / charging cable is not con-
nected correctly
Unit is not activated
The cuff is not properly fastened or
pressure in the cuff is too high
The unit hast detected movement or
pulse rate is too low
No pulse signal is detected
The measuring process was not
successful
A calibration error has occurred
Measured values are outside the
measurement range
51
Solution
Charge battery
Charge battery
Check adapter and charging cable and
plug in correctly
Press and hold down „MEM" button to
activate the unit
Rest for a short period of time, re-fasten
the cuff and measure the blood pressure
again
Movement can influence the measurement.
Relax for a moment and then measure
again
Loosen clothing around the arm and
measure again
Rest for a short time and retake the
measurement
Repeat the measurement.
If the problem persists, contact
your dealer or our customer service depart-
ment for further support
Relax for a moment. Re-fasten the cuff and
measure again. If the problem re-occurs,
consult your physician
EN