Shenzhen Creative Industry Co. Oxy-One Plus Modo De Empleo página 55

 Measuring mode
Spot check mode: the measurement starts

automatically when the finger is inserted into the
finger clip properly, the measuring time lasts 30
seconds with a counting-down indication. The SpO
2
and PR readings will freeze at the end of 30 seconds,
the analysis result for the pulse rhythm will be
displayed on the screen as well. Once the finger is out,
the display will be cleared and the Oximeter shuts
down automatically.
Continuous mode: measurement will start

automatically when finger is inserted into the oximeter,
SpO and PR readings will be displayed until the finger
2
is removed from the oximeter. Once finger is removed
the Oximeter will automatically turn off.
 Record list
 A single group of stable readings will be recorded in
the record list each time when the Oximeter shuts
down regardless of spot-check or continuous mode.
However, if the time from displaying valid readings to
the end of measurement is less than 5 seconds, then
4