Publicidad
Idiomas disponibles
Idiomas disponibles
– do not use in case of intolerance of one of the materials used
– no re-use – this medical aid is intended for treating one patient
– whilst wearing the brace, please neither use any creams nor ointments on
or around it as they can destroy the material
Fitting instructions
1
Before putting it on, set the thumb wrap and the wrist strap to the
largest possible circumferences and pull the BORT Generation thumb
splint over the thumb and the metacarpus.
2
Firstly, set the thumb wrap and next the wrist cord strap which can be
set to the individual width using the Velcro surfaces.
3
Close the support completely.
Removal
To remove the support, please open the Velcro fasteners and slip the thumb
brace off.
Material composition
Polyamide (PA), elastane (EL)
The sewn in textile label provides the precise material composition.
Cleaning information
Hand-washing
Do not dry in a tumble dryer
Do not use fabric conditioner. Dry in the fresh air.
Do not clean chemically
Do not iron
Do not bleach
EN
09
Publicidad
