Buffalo filter VisiClear Manual Del Operador página 18

You may also adjust the brightness of your touch screen display by pressing the button that
contains a sun illustration. See Figure 20.
Figure 20.
Once you press this button, the screen below will appear and you may use the negative button
to decrease brightness or positive button to increase brightness. See Figure 21.
Figure 21.
The VisiClear™ also allows you to increase or decrease the amount of time the VisiClear™ System
remains on after release of the electrosurgical button when the system is coupled with our
EZLink Automatic Activation Device. This delay is for the purpose of capturing residual smoke
plume that may linger after the electrosurgical unit is deactivated. By pressing the button
indicated an electrosurgical pencil and hourglass, you can adjust the delay from 0-10 seconds by
pressing the negative sign to decrease the delay or the positive sign to increase the delay. If the
EZLink is set to 3 seconds and the VisiClear™ is set to +5 the actual delay time will be 8 seconds.
See Figures 22 and 23. You may press the Back Button to return to the previous menu.
Figure 22.
Buffalo Filter® VisiClear™ Operator's Manual 18