Troubleshooting - Smartpond 80-500 GPH Manual De Instrucciones

WINTERIZATION
• Put the unit out of operation at water temperatures below 46
°F (8 °C) or, at the latest, when freezing temperatures are to be
expected.
• Thoroughly clean the unit, check for damage.
• Ensure that the storage place is inaccessible to children.

TROUBLESHOOTING

IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in, the pump is
getting power and the pump is fully submerged. Pump will not
operate unless fully submerged. When water levels are low, the
pump automatically turns off.
• Check the pump outlet and any tubing, fountains, spitters etc. for
kinks or obstructions.
• Perform MAINTENANCE steps 1-4 on the pump
• Remove the inlet screen and/or pump cover, and impeller cover
to expose the impeller. Turn the impeller to ensure that it is not
broken or jammed.
• Confirm flow control is on highest setting or run the pump under
water to help prime pump
IF THE PERFORMANCE OF THE PUMP IS NOT
SATISFACTORY OR THE PUMP
DOES NOT FLOW EVENLY:
• Check to make sure the pump is
completely submerged in water.
• Check to make sure the impeller, water
sensor and the housing are clean.
• Adjust flow control
For more information on product maintenance and
maintenance videos, visit www.smart-pond.com/maintenance
12
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.