Troubleshooting - Smartpond 52672 Manual De Instrucciones

Step 2. Open the cover then pull the pump
out of the shell.
Step 3. Remove the impeller housing to
expose the impeller assembly. Remove the
impeller assembly by gently pulling on the
impeller blades.
NOTE: The impeller is held in place by a
magnet.
Step 4. Use a soft cloth or brush and warm
water to clean the impeller, the inside of the
impeller housing and rotor housing.
Step 5. Reassemble all pump parts,
place pump back in the shell, and lock.
Reconnect all tubing and adapters. Place
in water before reconnecting to the power
source.

TROUBLESHOOTING

IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in and the pump
is getting power.
• Check the pump outlet and any tubing, nozzles, spitters etc. for
kinks or obstructions.
• Unlatch the clamps, open cover then bring the pump out.
Remove the impeller housing to expose the impeller. Turn the
impeller to ensure that it is not broken or jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY
OR THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in water.
• Check to make sure the shell, impeller, and the housing are clean.
• Adjust flow control.
For more information on product maintenance and
maintenance videos, visit www.smart-pond.com/
maintenance
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
2
3
4
5
5