Pre-Operation Check - Honda Power Products WJR2525 Manual De Explicaciones

6. PRE-OPERATION CHECK

For safe and efficient spraying, always make a pre-operation
inspection before operating:
Before performing a pre-operation inspection, place the backpack
sprayer on a level surface, stop the engine and make sure that the
engine switch is in the OFF position to be certain the engine will not
start accidentally.
Before each use, look around and underneath the engine for signs of
oil or gasoline leaks.
1. Check the engine oil level.
Every 10 hours, check the engine oil level and replenish oil up to the
upper limit if the engine is operated for long time continuously.
CAUTION:
Engine oil is a major factor affecting engine performance and service
life. Nondetergent or vegetable oils are not recommended.
Check the engine oil level with the engine stopped and in a level
position.
a. Remove the oil filler cap.
b. Check the oil level. If it is below the upper limit, fill with the
recommended oil (see page 29) to the upper limit.
c. Reinstall the oil filler cap securely.
Add the engine oil slowly to avoid overflowing, as the engine oil tank
capacity is small.
28