Denios FS 305 Manual Del Usario página 7

Betriebsanleitung
English
1. General Instructions
The general instructions for storage systems, material no. 103041, in the current version, must be observed.
National standards and safety regulations must be observed.
2. Special Instructions
Area of the grating must remain free as shown on the type label.
3. Use and intended purpose
The storage system/sump is used for the safe storage of hazardous substances in 200 litre drums and in cans
and other small containers.
Only store substances to which the material of the sump is resistant.
See the General Operating Instructions.
4. Technical details
Design
The drum container consists of a sturdy, hot dip galvanized steel profile frame, galvanized profiled roof and rear
panel and lockable wing doors with mesh panels. The side panels on the FS 305 model are manufactured from
steel mesh and the side panels on the FS 305-Z model are manufactured from steel. The container has a pro-
truding roof and hot dip galvanized grid shelves. The integrated sump is manufactured from steel RST 37-2
(Wst. No. 1.0038) and there is a 100 mm space between the base and the floor to prevent corrosion.
5. Assembly
Point of use
The floor must be level to ensure that the drum cage can be anchored to the floor.
-
The storage system can only be secured to concrete floors, which comply with DIN 1045.
-
The container can be installed indoors and outdoors.
-
The container should not be accessible to unauthorised personnel.
-
Maximum charge of snow: 0,75 kN/m². Please vacate the snow if in case of overstepping.
-
Charge de neige admissible 0,75 kN/m
-
Further details are available in the general operating instructions.
-
Fass-Container Fs 205 / Fs305 Z
115358, 115360
2
. Evacuer la neige en cas de surcharge.
Seite 7 von 20 Seiten Ausgabe 06/2007