Siemens VS08G Serie Instrucciones De Uso página 27

Vacuuming
a
CLICK!
CLICK!
b
c
Vacuuming with accessories
Pull the 4 in 1 tool in the direction of the arrow to
remove it from the tool holder.
a) Crevice nozzle
For vacuuming in crevices and corners.
For difficult to reach places, the 4 in 1 tool can be
extended to two different lengths by pulling out the
crevice nozzle.
For either length extension, pull the crevice noz-
zle out until you hear it engage.
The crevice nozzle can be pushed back in again
by releasing the telescopic locking mechanism
(pressing it in the direction of the arrow).
b) Upholstery nozzle
For vacuuming upholstered furniture, curtains, etc.
c) Furniture brush
For window frames, cabinets, profiles etc.
Fold the upholstery nozzle over in the direction of
the arrow.
To extend the brush ring, turn in the direction of
the arrow.
Before inserting the 4 in 1 tool into the tool holder,
retract the brush ring and fold the upholstery noz-
zle back.
You can use the parking aid on the back of the vacu-
um cleaner if you wish to stop vacuuming for a short
time.
Slide the plastic lug on the tool connector into the
groove at the back of the vacuum cleaner.
First switch the vacuum cleaner to »stand-by« mode.
de en
29