Silvercrest SGM 110 A1 Instrucciones De Uso página 14

Ocultar thumbs Ver también para SGM 110 A1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To order more collagen tablets
department (see chapter regarding "3 year limited warranty").
8) Close the fill opening
slightly offset on the fill opening
ing
Then, turn the fill opening closure
fill opening closure
9) Press the "Start" button . You will hear a beep and the indica-
tor light
The appliance will start mixing and heating the ingredients.
If you remove the mask tray
of the mask liquid, you will hear the beeping sounds and the indicator
light
will turn yellow. Preparation of the face mask continues, but the
mask liquid is not dispensed. Dispensing begins only once the mask tray
has been placed correctly under the appliance and the face mask has
finished mixing.
After about 6 minutes, the facial mask will be ready and the facial
mask will automatically run into the mask tray
light
Preparation time can vary according to the starting temperature and type
of ingredients!
Approx. 20 seconds after the face mask is poured into the mask
tray
, long beeps will sound. Disconnect the power plug from
the power socket.
10) Tilt the mask tray
liquid.
SGM 110 A1
must slide into the recesses on the fill opening closure .
will light up permanently green.
from the appliance during the preparation
will flash green continuously.
slightly to ensure optimal distribution of the
, please contact our customer service
by placing the fill opening closure
: The latches in the fill open-
slightly clockwise until the
closes firmly.
. The indicator
 11
US-EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido