How To Measure Weight And Height - Baxtran BBS Manual Usuario

6. HOW TO MEASURE WEIGHT AND HEIGHT

To ensure the accuracy of measurement, please use the scale on a flat and firm floor.
1. Press " " to switch on scale and go back to previous user number. Long press "
switch user, Long press again to confirm. Data will not be saved in guest mode, (user number "O").
2. Pull out the silicone plug and insert the overhead board (Refer to Diagram 1 to 2).
3. Lift open up the handle to vertical for activating the height measurement, and keep it totally leaned toward initial position, LCD will show
46.0cm/18.1 in as initial value. lf not, press "
4. Lay down your baby carefully on the scale. The head should touch the overhead board, at the same time, the feet should touch the vertical
handle.
5. Press " " to hold the measurements of weight and height. Results flash twice for confirmation and are stored in scale memory.
Comparison to previous data will be displayed in difference value repeatedly. In guest mode, measurements will be displayed for reference,
but will not be saved. (Press"
Note: About memory of scale: Maximum 8 user supported. 15 records far each user. The oldest record will be overwrote by the latest record
when the records are more than 15.
Note: For weight measurement only, just skip step 2 & 3.
Overhead Board
Silicone Plug
Overhead Board
Silicone Plug
12
" to initialize the value, then pull out the measurement board to measure baby's height.
" to cancel locking or let it turn off automatically without any operation.)
USER'S MANUAL BBS
" to choose user, and then short press to
Diagram 1
Measurement
Board
Handle
Diagram 2
EN EN
Handle