External Views; Front View; Rear View - Tripp-Lite NetController B040-008-19 El Manual Del Propietario

1. Features
(continued)

1.5 External Views

Front View

1
Upper Handle: Pull to slide the KVM Switch out; push to slide the KVM Switch in.
2
19" LCD Display: Built-in on-screen display (OSD) for convenient KVM Switch control, including port selection.
3
OSD Push Buttons: Used to access the OSD Menu to adjust the LCD display.
4
LED Indicators: The red LEDs will illuminate above each port with a connected computer that is running power through the console interface. If the connected
computer is powered off, the red LED will not be illuminated. The green LEDs will illuminate above the computer port that is currently selected as active.
5
Port Selection Buttons: Push to directly select the active computer channel that can be controlled by the shared keyboard, touch pad and LCD display
6
Keyboard
7
2-Button Touch Pad: Left button is left click, right is right click. Run your finger up or down the far right side of the touch pad to scroll up and down a screen.
8
Slide Release: Mechanism to lock the drawer closed when the console is not in use. Prevents it from accidentally sliding open. To slide the console out, you
must first release it by moving the tab sideways.
9
Rackmounting Brackets: There are rackmount brackets to secure the chassis to a system rack located at each corner of the unit.
10
Railway Release Tabs: When the drawer is completely pulled out to the end, the railway system will lock. Push the release tabs on both sides to release the
drawer so that it can be pushed back in.

Rear View

2 4
5
2 4
FIRMWARE UPGRADE
FIRMWARE UPGRADE
DAISY-CHAIN OUT
DAISY-CHAIN OUT
5
1
Power Dongle: The power dongle should receive electricity from the included AC power cord.
2
USB Port: The USB port is available if you want to use a separate keyboard or mouse.
3
PC Ports: The PC port is a HD15 (F) connector integrated with USB and PS/2 keyboard, mouse and video. To connect a computer to the PC port, you
will need one of Tripp Lite's P780-Series USB PS/2 KVM Cable Kits. Not included.
4
Firmware Upgrade Port: This port is used during the firmware upgrade process (see 3.3.9 Upgrade Firmware on pg. 11).
5
Daisy-Chain OUT Port: The daisy-chain OUT port is a HD15 (F) connector which provides daisy-chaining downstream to a B042-Series KVM Switch.
1
2
3
4
5
6
7
8
1 3
Figure 1-2: B040-008-19 Rear Panel
1 3
100-240V AC 50/60Hz 16 15
100-240V AC 50/60Hz 16 15
8 7
8 7
Figure 1-3: B040-016-19 Rear Panel
14 13 12
14 13 12
6 5 4
6 5 4
3
Figure 1-1: NetController KVM Front Panel
9
10
NetController™ 16-PORT CONSOLE KVM SWITCH MODEL: B040-016-19
NetController™ 16-PORT CONSOLE KVM SWITCH MODEL: B040-016-19
11 10
11 10
3 2
3 2
9
9
1
1