Maintenance; Changing The Light Bulb - Maytag SKYBOX ROOKIE Manual Del Usuario

Maintenance

Changing The Display Panel
Your refrigerator comes with a standard front display
panel. To purchase customized, interchangeable front
panels visit www.skyboxbymaytag.com or call
1-866-692-2774.
1. Make sure the refrigerator power cord is unplugged.
2. Remove the beverage bin (see previous
section).
3. Remove the top display panel cover, by lifting it
upwards off of the door to expose the top edge of
the display panel.
4. Gently press hands onto front display panel within
frame and slide it up and out of the beverage
vendor.
5. Slide the new customized display panel into the
front frame, making sure the panel slides behind the
lower edge of the frame opening.
6. Replace the top display panel cover by aligning it
with the top of the door and gently pressing it down
into place, snapping the three U-shaped snaps over
the posts in the door.
7. Attach the beverage bin.
7

Changing The Light Bulb

1. Make sure the refrigerator power cord is
unplugged.
2. Remove the front display panel cover by lifting it
upwards off the door to expose the top edge of the
display panel.
3. Remove the display panel to expose two screws in
the center top and bottom of the clear panel.
4. Remove the screws.
5. Lift the clear panel up and out of the unit, exposing
the socket for the light bulb.
6. Remove bulb by rotating the bulb toward you.
7. Install a new 18-inch fluorescent bulb (F15T4) by
sliding it into the light socket and rotating the bulb
away from you until it clicks into place.
8. Replace the clear panel.
9. Reinsert the screws.
10. Slide the front display panel back into place in front
of the clear panel, behind the lower edge of the
frame opening.
11. Replace the top display panel cover by aligning it
with the top of the door and gently pressing it
down into place.
Cleaning
Never use harsh, abrasive cleaners, heavy-duty
cleaners, or solvents on any surfaces.
Exterior:
• Wipe with damp, sudsy cloth, rinse and dry.
Refrigerator Section and Beverage Bin:
• Most spills can be cleaned up with a damp cloth
or sponge.
• Wash shelf, Beverage Bin, and other removable
parts in warm, sudsy water, rinse and dry.
• Wash interior of refrigerator with baking soda
solution (3 tablespoons to 1 liter of water) or
warm sudsy water, rinse and dry.