Troubleshooting; Clearing Paper Jams - Kyocera TASKalfa 400ci Guía De Uso

English

Troubleshooting

Paper

Clearing Paper Jams

When a paper jam occurs, copying stops and the machine operation panel will display a message indicating a
paper jam has occurred.
NOTE:
Leave the main power switched ON ( | ) while performing the procedure to clear paper jams. The
machine operation panel will return to the display previous to the paper jam when the paper jam has been
cleared.
Coupling Section
20
If ejected copies are not flat or are stacked unevenly,
turn over the paper in the cassette and reload it. If
copies are curled, refer to Curled Output on page 31.
If a paper jam occurs, check the side guide located in
the cassette is adjusted to the size of paper loaded.
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the coupling
section between the Document Finisher and the
machine.
1
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
While pushing the finisher release lever, pull the
finisher out from the machine.