Kyocera TASKalfa 400ci Guía De Uso página 29

Center-Folding Unit (option)
Conveyor Section
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
If the illustration shown displays on the machine's
operation panel, there is a paper jam in the conveyor
section of the Center-Folding Unit.
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8) and remove the jammed
paper.
If there is no paper jam in the right cover (D8),
proceed to the following step.
3
Close the right cover (D8) and re-install the finisher
back into position on the machine.
4
Open the front cover.
5
Pull out the inner tray (D5).
English
27