Storage; Technical Data; Fcc Statement - Easy Home MD 10229 Manual Del Usuario

Storage

If the remote control
level may be low or empty. Replace the inserted battery as follows:
1. Turn the remote control over.
2. Pull the battery tray
of the battery tray to the right (see step 1 in Fig. D).
3. Take the inserted battery out of the battery tray and dispose of it in
accordance with the applicable regulations (see chapter "Disposal").
4. Insert a new battery of the same type in the battery tray. Make sure the
polarity is correct ("+" side is facing up) (see step 2 in Fig. D).
5. Slide the battery tray back into the remote control so that it locks into place
(see step 2 in Fig. D).
You have successfully replaced the battery.
Storage
Before storing the product, clean the product as described in the chapter
"Cleaning and maintenance". All parts must be completely dry before being
stored.
− Always store the product in a dry area.
− Protect the product from direct sunlight.
− Store the product so that it is not accessible to children, securely locked away
and at a storage temperature between 41 °F and 68 °F (5 °C and 20 °C).

Technical data

Model:
Power supply:
Power:
Battery (remote control):
Weight:
Dimensions (W × D × H):
Product code:

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device maynot cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
20
10 is not responsive or not working, the battery power
13 out from the remote control while pushing the tab
MD 10229
110 V~, 60 Hz
65 W
CR 2025
approx. 13.67 lb (6.2 kg)
approx. 12.2 × 12.2 × 29 in (30 × 31 × 74 cm)
806165