Easy Home MD 10229 Manual Del Usuario página 9

Safety
− Do not place the product such that there is a risk of it
falling into a tub or sink.
− Never reach to retrieve an electrical device if it has fallen
into water. In such a case, immediately disconnect the
power plug.
− Never insert any objects into the housing.
− Always switch the product off and unplug it when you
are not using it, when you intend to clean it, or in the
event of a malfunction. Fully assemble the product before
switching it on again.
− Do not run the power cord under carpeting. Do not cover
the cord with throw tugs, runners, or similar coverings. Do
not route the cord under furniture or appliances. Arrange
the cord away from traffic area and where it will not be
tripped over.
− Do not operate the product in the presence of explosive
and/or flammable fumes.
− WARNING: To reduce the risk of fire or electrical shock, do
not use the product with any solid-state control device.
− If electric circuit is overloaded with other appliances, the
product may not operate properly. The product should
be operated on a separate electrical circuit from other
operating appliances.
− A loose fit between the AC outlet (receptacle) and plug
may cause overheating and a distortion of the plug.
Contact a qualified technician to replace a loose or worn
outlet.
− Do not remove the water tank while the unit is plugged in.
− Do not modify the plug in any way. The product has a
polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
10