Louisiana Grills BLACK LABEL LG0800BL Manual Del Propietário página 9

9
CONTROL DESCRIPTION
This readout displays both the Actual and Set temperatures. The Actual temperature is constantly
displayed unless the Set temperature is being adjusted. The Actual temperature is the temperature
from inside the Main Barrel. The Actual temperature readout is taken by the grill probe (sensor) from
the inside of the grill barrel.
To show the Set temperature, press either of the Adjustment Arrows. The Set temperature is active
when the readout is blinking. To adjust the Set temperature, press the up and down Adjustment Arrows,
as needed. Once the desired Set temperature is reached, wait three seconds (to confirm the Set
temperature), then the readout will return back to the Actual Temperature.
Displays the Recipe Stages. There are nine Recipe Stages available to set. Adjust the settings of each
Recipe Stage by using the Recipe Button and Adjustment Arrows. There are a total of nine Recipe
Stages available to be programmed.
Displays the Time set during the Recipe Stages. Press the Recipe Button to activate the Recipe settings.
Use the Adjustment Arrows to switch through the Recipe Stages, one being the Time. Press the Recipe
Button again to confirm the settings made.
Press the MPC Button to activate the temperature settings of the Meat Probes. Press the MPC Button
again to switch between the different Meat Probes.
Displays the temperature of the connected Meat Probe(s). The displayed Meat Probe readout will
correspond with the plug-in connection port selected: P1 or P2. The Meat Probe ports are located on the
front of the Control Board. When the MPC Button is pressed, the selected Meat Probe readout will blink
and the letter 'C' (of MPC) will be on.
When not in use, disconnect the Meat Probe from the connection port and code "noP" will be displayed.
Compatible with Louisiana Grills® branded meat probes only.
The Flame icon visually displays the intensity of the fire in the burn grate. As the temperature increases
from within the Main Barrel, the color of the Flame will turn from blue to red. The color will also change
when you are adjusting the Set temperature.
The FAN icon is visible when the fan is in operation. When the central readout has an error code (Err)
and the FAN icon is blinking, the Fan is not working. See the section on troubleshooting for assistance.
The AUGER icon is visible when the auger is turning. When the central readout has an error code
(Err) and the AUGER icon is blinking, the auger is not working. See the section on troubleshooting for
assistance.
The IGNITOR icon is visible when the ignitor is in use. When the central readout has an error code (Err)
and the IGNITOR icon is blinking, the ignitor is not working. See the section on troubleshooting for
assistance.
When the central readout has an error code (Err) and the PELLET icon is visible, the fire in the fire pot
has gone out or the hopper may be empty. See the section on troubleshooting for assistance.
www.louisiana-grills.com