Operating The Dryer - Kenmore 796.8127 Serie Manual De Uso

OPERATING THE DRYER
O
LOAD THE DRYER
Load the dryer with the wet laundry from the washer, if the load is
extra large, you may need to divide it into smaller loads for proper
performance and fabric care.
O
CLEAN THE LINT FILTER
If the tint filter has not already been cleaned, tilt out the filter and
remove the tint from the last toad. This will help ensure the fastest
and most emcient drying performance.
POWER
O URN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs will
illuminate and a chime will sound.
O
SELECT A CYCLE
Turn the cycle selector knob in either direction until the LED for the
desired cycle is illuminated. The preset temperature, dry level, and
option settings for that cycle will display.
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed, if
desired.
NOTE: Not all options or modifiers are available with all cycles.
Temperature can only be adjusted on Timed Dry cycles; Dry Level is
only available on Auto Dry cycles. A different chime will sound and
the LED will not illuminate if the selection is not allowed.
Less Time
I
Touch Up 1
Co_,*rol Lock
O SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons,
NOTE: Not all options or modifiers are available with all cycles.
A different chime will sound and the LED will not come on if the
selection is not allowed.
START/PAUSE
O
O
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be
paused at any time by opening the door or by pressing the START/
PAUSE button. If the cycle is not restarted within four minutes of being
paused, the dryer will shut off and the settings will be lost.
END OF CYCLE
When the cycle is finished, a chime will sound. Immediately remove
your clothing from the dryer to reduce wrinkling. If WRINKLE
GUARD is selected, the dryer will tumble briefly every few minutes
to help prevent wrinkles from setting in the clothes.
19