WAR[_
i N G**
To reduce the risk of fire, electric
shock, or injury to persons
when using this appliance,
follow
basic precautions, including the following:
SAFETY INSTRUCTIONS
FOR CONNECTING
ELECTRiCiTY
WARN
i N G:
To reduce the risk of fire, electric shock, or injury to persons when using this appffance,
follow
basic precautions, including the followlng:
* Do not, under any circumstances, cut or remove
the ground
prong from the power cord. To prevent
personal injury or damage
to the dryer, the electrical
power cord must be plugged
into a properly
grounded
outlet.
* For personal safety, this dryer must be properly
grounded.
Failure to do so can result in electrical
shock or injury.
* Refer to the installation instructions in this manual
for specific electrical requirements for your model.
Failure to follow these instructions
can create an
electrical
shock hazard and/or
a flre hazard.
* This dryer must be plugged into a properly grounded
outlet.
Electrical shock can result if the dryer is not
properly grounded.
Have the wail outlet and circuit
checked by a qualified electrician to make sure the
outlet is properly grounded. Failure to fotiow these
instructions can create an electrical
shock hazard
and/or
a fire hazard.
* The dryer should always
be plugged into its own
individual electrical outlet which
has a voltage
rating
that matches the rating plate. This provides the best
performance
and also prevents overloading
house
wiring
circuits which could cause a fire hazard from
overheated
wires.
Never unplug your dryer by pulling on the power
cord. Always grip the plug firmly
and pull straight
out from the outlet.
The power cord can be damaged,
resulting in a risk of fire and electrical
shock.
Repair or replace immediateiv
all power cords that
have become frayed
or otherwise damaged.
Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. The power cord can
melt, creating
electrical
shock and/or
fire hazard.
When instailing or moving the dryer, be carefu[ not
to pinch, crush, or damage the power cord. This witl
prevent injury and prevent damage
to the dryer from
fire and electrical
shock.
SAVE THESE INSTRUCTIONS