Kenmore 796.8127 Serie Manual De Uso página 28

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Should you experience
any problems with your
dryer, it has the capability
of transmitting
data via
your telephone
to the Kenmore Connect Team. This
gives you the capability
of speaking directly
to our
specially
trained
technicians.
The technician
records
the data transmitted
from your machine and uses it
to analyze the issue, providing
a fast and effective
diagnosis.
Using the Kenrnore Connect
TM
System
Follow the technician's
instructions
and perform
the following
steps when requested.
If you experience
problems with your dryer, call
1-800-4-MY-HOME
®. Only use the Kenmore Connect
System feature when instructed to do so by the
Kenmore Connect Team. The transmission
sounds that
you will hear are normal and sound similar to a fax
machine.
Kenmore Connect cannot be activated
unless your
dryer is turned on by pressing the POWER button. If
your dryer is unable to turn on, then troubleshooting
must be done without
using Kenmore Connect.
Appearance
may
vary
by model.
HOLD
the mouthpiece
of your phone over the POWER button, when instructed
to do so by
the call center, no more than one inch from (but not touching)
the machine.
NOTE: Do not press any other buttons or turn the cycle selector
knob.
PUSH
and hold the TEMP button while continuing
to hold your phone to the
POWER button.
LISTEN
for three beeps. After you hear the three beeps, release the TEMP button.
Keep the
phone in place until the tone transmission
has finished. This takes about 17 seconds, and the
display will count down the time. Once the countdown
is over and the tones have stopped,
resume your conversation
with the technician,
who will then be able to assist you in using the
information
transmitted
for analysis.
NOTE:
* For best results, do not move the phone while the tones are being transmitted.
* If the call center agent is not able to get an accurate
recording
of the data, you may be
asked to try again.
* Pressing the POWER button during the transmission
will shut off Kenmore Connect.
28

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

796.9127 serie

Tabla de contenido