Alarm Setting - auna Commuter Manual Del Usuario

EN
26

ALARM SETTING

• Turn on the radio.
• Press the MENU button, then select System with the
• Confirm your selection by pressing the OK button.
• Select Alarm 1 or Alarm 2 with the
button to confirm your selection.
• Select ON for Alarm 1 with the
pressing the OK button.
• Select the alarm time (hour and minute) with the
your selection by pressing the OK button.
• Select the frequency with the
/ on weekdays). Confirm your selection by pressing the OK button.
• Select the alarm source (alarm sound/FM/DAB) with the
Confirm your selection by pressing the OK button.
• Select the volume with the
pressing the OK button.
• Select the duration (120 min / 90 min / 60 min / 45 min / 30 min / 15
min) with the / buttons. Confirm your selection by pressing the OK
button.
Note: If you want to return to the previous step during alarm setting,
press the INFO button. If you have selected a station with poor reception
as an alarm source, it may be that the alarm cannot be activated at the
set time.
Turning off the alarm
When the alarm goes off, press the INFO button. The alarm goes off and the
unit goes into standby mode.
Note: If the alarm is not turned off when it sounds, it will continue to run
for the selected period (120 min / 90 min / 60 min / 45 min / 30 min /
15 min).
/ buttons, and press the OK
/ buttons. Confirm your selection by
/ buttons. Confirm
/ buttons (daily / once / on weekends
/ buttons. Confirm your selection by
/ buttons.
/ buttons.