Using Headsets; Turning The Device On Or Off - ViewSonic ViewPad E70 Guia Del Usuario

1. Connect one end of the AC adaptor to the Micro USB
port of the device.
2. Plug the other end of the AC adaptor to the wall outlet
to start charging.
When the battery is charging and the device is turned on,
the icon is displayed on the status bar. When the
battery is fully charged, the
status bar.
NOTE: The LED indicator will turn to blue when fully power charged.

1.5 Using Headsets

For hands-free conversation or listening to music, plug a headset to the headset jack.
NOTE:
• When using a headset, your ability to hear outside sounds may be limited.
Do not use headset if it will endanger you.
• When using a headset, do not set the volume to its maximum as it may
damage your hearing.

1.6 Turning the Device On or Off

After installing the memory card and charging the battery, the device is ready to be
turned on.
To turn on your device
Press and hold the Power button until the device
blinking purple twice.
To turn off your device
1. Press and hold the Power button for 5 seconds.
2. A pop-up window appears, tap OK to confirm.
To set your device to Sleep mode
To set the device to sleep mode, press the Power
button. This will turn the display off.
To turn the display on, press the Power button again.
icon is displayed on the
4