Complete The Installation - Kohler K-10087 Manual Del Usuario

Bushing
Spline Adapter
Washer
Spout
Cover
Handle
Screw

5. Complete the Installation

Position a washer around each opening on the backside of the
cover, then place the cover over the spout shank and sleeves.
Thread a bushing onto each valve.
Firmly push a spline adapter onto each valve.
Firmly push a handle over each bushing until each handle is
flush with the cover.
Carefully slide the spout onto the shank, then properly position
the spout.
Using a hex wrench (provided), insert and tighten a screw into
the underside of the spout.
Kohler Co. 7 1139731-2-A