Himsa NOAHlink Manual Del Usuario página 24

 Attach the cable/s (recommended by the hearing instrument
manufacturers) for the programmable hearing instrument/s to
the connector/s at the top of the NOAHlink unit.
 Connect the ends of the neck string to the attachment points
of your NOAHlink according to the color of their plastic
connections (red and blue). Hang the NOAHlink from the
neck of your patient with this string.
OR:
Attach one plastic attachment button of the neck string to
your NOAHlink. Place the string around the neck of your
patient and attach the remaining neck string to the empty
attachment point on your NOAHlink.
 Adjust the length of the neck string if necessary to ensure a
comfortable fit on the patient.
 Connect NOAHlink to the hearing instruments via the cables
attached to the top of the unit.
 Ensure the patient is not more than five meters from your
PC.
 Start the fitting module on your PC and refer to this program
for details on programming the hearing instruments.
 When programming a hearing instrument the LED on your
NOAHlink, nearest the ear containing the instrument, flashes
with a green light. This indicates that NOAHlink is
communicating with the cable attached to the hearing
instrument and, therefore, programming the instrument as
required.
 Switch off your NOAHlink when you have finished using
the device by pressing the button at the front of the unit until
all lights no longer display.
(NOTE: If your NOAHlink remains idle for more than 30
minutes, or if it is placed in the charger, it will
automatically turn itself off.)
NOAHlink Users Manual
21