8.2.3 Testing Data Transfer Rates
The Performance tab allows you to test the transfer rate of data from
your PC to NOAHlink. You may wish to use this tab if your system
is running slowly or unable to retain a connection to NOAHlink.
The following describes how to run the speed test:
Click Start to begin the speed test. (Note: Each time you
press Start the window will be reset.)
Click Stop when the Min, Max and Average fields remain
unchanged. (Note: The speed test stops automatically if you
leave the Performance tab.)
The Current figure lists the current transfer rate of data from your
PC to NOAHlink; the Average figure lists its average transfer rate.
If the Average figure is low, causing your device to run very
slowly, you may wish to try one of the following:
move your NOAHlink closer to your PC
end CPU-consuming programs on your PC which may be
responsible for slowing the transfer rate of data
remove other Bluetooth devices in the area
Figure 11: The Performance tab
NOAHlink Users Manual
31