Troubleshooting; Disposal; Warranty; Technical Changes - GOK SmartBox 1 Instrucciones Para El Montaje Y El Funcionamiento

TROUBLESHOOTING

Error code Significance
The set value is invalid
Error E1
Measured value too small (I < 3.7 mA  probe defective)
Error E2
Measured value too great for zero point calibration (probe must not be
Error E3
immersed)
Measured value not plausible. Check menu item "9.Offset probe"
Error E4
Set height is more than the height of the tank. (incorrect entry menu step 10)
Error E5
The current measured value is too low as a reference point. The probe must
Error E6
be submerged. The set height (menu step 10) is too high (the measured
value is too low) Check menu item "9. Offset probe". Otherwise, probe fault.
The current measured value is too low in relation to the set tank height or to
Error E7
the tank volume. The probe must be submerged.
Measured value (probe current) is too high - check electrical connection and
Error E8
measuring range of the probe, switch power supply off and on again. Check
menu settings steps 1 to 5. If necessary, Check menu step "9.Offset probe".
Otherwise, probe fault.
Probe current = 0 mA - no signal current. The probe cable is poled wrongly
Error E9
or interrupted; check cable extension, reconnect if necessary.
Calibration error. Disconnect the display device from the power supply, wait
Error E10
5 s and then reconnect. Otherwise, probe fault.
Error E11
measurement. You can still press [Enter] to confirm and continue.

DISPOSAL

To protect the environment, our electrical and electronic appliances may not be
disposed of along with household waste.
At the end of its lifespan, each end user is obligated to pass old appliances to a district
or area collection point, separate from household waste. This ensures that old
appliances are disposed of properly and negative effects on the environment are
avoided. Our registration number for the electrical old appliances register (EAR) is:
WEEE-Reg.-No. DE 78472800.

WARRANTY

We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.

TECHNICAL CHANGES

All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.

CERTIFICATE

Our management system is certified according to ISO 9001, ISO 14001 and
ISO 50001, see:
www.gok.de/qualitaets-umwelt-und-energiemanagementsystem.
Artikel-Nr. 28 100 51 h
SmartBox
The liquid level in the tank is actually too low for an exact
® ®
1 / SmartBox
®
2 / SmartBox 3
31 / 112